Xerox 490 - Manual (Page 14)

PC-GUI Introduction and Setup Xerox 490/980 Color Continuous Feed Printing System
1-2 Printer & PC GUI Guide
Set Screen Resolution and Power Options
1. To set a screen resolution, right-click on a empty part of the Desktop and select
[Properties]. The Display Properties dialog box appears.
2. Select the [Settings] tab and select the slider in Screen resolution, or drag it and drop, to
1280 x 1024 pixels.
3. Select [Highest (32 bit)] from the Color quality pull-down list.
4. Select [Apply].
5. Select [Yes].
6. Confirm the settings and proceed to set up a screensaver.
7. Select the Screen Saver tab and select [None] from the Screen saver pull-down list.
8. Select [Power....] and the Power Options Properties dialog box will appear.
9. Select [Home/Office Desk] from the Power schemes pull-down list.
10. Select [Never] for all of the [Turn off hard disks], [System standby] and [Hibernate] pull-
down lists. Leave Turn off monitor at the default or set it to any value of your choosing.
11. Select the [Advanced] tab and select [Prompt for password] when computer resumes from
standby. Leave other options at their defaults or set them to any values of your choosing.
12. Select the [Hibernate] tab and clear Enable hibernation.
13. Select the [UPS] tab and verify the settings. Select [OK] and the Power Options Properties
dialog box will close.
14. Select [OK] in the Display Properties dialog box. The Display Properties dialog box will close.
Set Time
1. Select [Start], [Settings] and select [Control Panel]. The Control Panel window appears.
2. Double-click the [Date and Time] icon. The Date and Time Properties dialog box will
appear.
3. Select the [Time Zone] tab to verify that the correct time zone is set. To change the time
zone, select a new time zone from the pull-down list.
4. Select the [Date & Time] tab to verify the Current time zone and select [OK].