Xerox 490 - Manual (Page 124)

Queue Management Xerox 490/980 Color Continuous Feed Printing System
8-12 Printer & PC GUI Guide
Color Characteristics - Upstream
Set the color characteristics to be handled by a printer on a single configuration or by a
upstream printer on the duplex configuration.
• Printer Name: The printer name can be set.
• Print Data: The print data output screen characteristics can be set. Select [Setting] to
display the Color Characteristics screen.
• Pre-printed Paper: The output screen characteristics of pre-printed paper can be set. Select
[Setting] to display the Color Characteristics screen.
• Same as Print Data: Check here to apply the same setting as the print data. The setting
cannot be done in case of PS/PDF.
Color Characteristics - Downstream
Set the color characteristics for the downstream printer in duplex configuration. The setting
contents are the same as in Color Characteristics Upstream. If the imposition file selected in
the paper tab is simplex, the downstream cannot be specified.