Xerox 490 - Manual (Page 91)

Printer & PC GUI Guide 7-1
7
Printer Management
Printer Management Overview
On the Printer Management menu, printer adjustment and consumable replacement can be
set. The Printer Management menu consists of the following tab menus.
Operation can be implemented when the printer is in NOT READY status. The Consumable tab
allows operation during error occurrence.
Tab Menus
On the PC-GUI
The printer management screen is organized into the following two tabs.
• Quality Setting
• Consumable
On the Printer GUI
There are following tab menus.
• Dens/Pos Adjust tab: Density and Position Adjustment tab. It is possible to set the print
density and the print position.
• Color Mode tab: It is possible to select the monochrome or color print mode.
• Consumable tab: The status of consumable are displayed. Also, the operation procedure is
displayed.
• System Config tab: The printer name can be set.
• Printer Config tab: The printer configuration such as single or duplex can be set.
• Mark tab: This section describes how to set whether to enable the ROF mark and how
many pages of adjustment printing to use.
• Sensor tab: The mark sensor that reads the TOF/ROF/duplex marks can be repositioned.