Xerox 490 - Manual (Page 16)

PC-GUI Introduction and Setup Xerox 490/980 Color Continuous Feed Printing System
1-4 Printer & PC GUI Guide
Uninstall Software
Uninstall software by selecting [Start] and pointing to Settings. Choose [Control Panel] and
[Add/Remove Programs] dialog box. If you choose, you may also follow the following steps to
remove the software:
1. Place the 490/980 Color Continuous Feed Printing System CD-ROM into the remote PC’s
CD-ROM drive.
2. Double-click [setup.exe]
3. Select [Remove] and select [Next]. The Confirm Uninstall dialog box will appear.
4. Select [OK].
5. Select [Finish]. The software uninstallation process is now complete.
Connecting to the Printer
When the PC-GUI is accessed, the 490/980 Color Continuous Feed window will open. If the
printer has just been installed or the PC-GUI has been installed for the first time, select [Add] in
the Select Server to Connect dialog box.
Enter the following information to connect the printer:
• Host Name: Type the network host name assigned to your printer. Any host name can be
specified if the PC-GUI is not managed by a DNS server.
• IP Address: Type the IP address (for example, 192.168.10.1) assigned to your printer.
• GUI Port: The PC-GUI and the printer communicate by transferring packets to each other
on a TCP/IP socket connection. Set a port number that is assigned to achieve this
communication.
• Console Port: Set a port to which the printer will transmit messages to display on the
console.
• Register: Select this option to register the connection settings.
• Cancel: Select this option to cancel the connection settings and close the dialog box.