TANDBERG Security Camera - Manual (Page 98)

98
D14049.03
MAY 2008
Grey Headline (continued)
TANDBERG VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Introduction Getting Started
Overview and
Status
System
Configuration
VCS
Configuration
Zones and
Neighbors
Call
Processing
Bandwidth
Control
Firewall
Traversal
Maintenance Appendices
Administrator Policy
Configuring Administrator Policy via a CPL script
For information on the CPL syntax and
commands that are supported by the
VCS, see
CPL Reference .
Uploading a CPL Script
You can use CPL scripts to configure advanced
Administrator Policy. To do this, you must first
create and save the CPL script as a text file,
after which you upload it to the VCS.
The CPL script cannot be uploaded via
the command line interface.
Upload File
Once you have selected the file containing the
CPL script, click here to upload it to the VCS.
Select the new policy file
Enter the file name or Browse to the CPL script
you wish to upload.
Show Policy file
Click here to download the Administrator Policy
that is currently in place, as an XML-based
CPL script.
if Administrator Policy has been configured •
using a CPL script, this will show you the
script that was uploaded
if Administrator Policy has been configured •
using the web interface, this will show you
the CPL version of the policy
if Administrator Policy is On but a policy has •
not been configured, this will show you the
default CPL script that allows all calls.
If you download a web-configured
Administrator policy as a CPL script and
then upload it back to the VCS without
editing it, the VCS will recognise the file and
automatically add each rule back into the
Administrator Policy section of the web
interface.
About CPL XSD files
The CPL script must be in a format supported
by the VCS. The Administrator Policy page
allows you to download the XML schemas
which are used to check the script before it
is uploaded to the VCS, so you can check in
advance that your CPL script is valid.
Downloading policy files
Show CPL XSD file
Downloads the XML schema used for the CPL
script.
Show CPL Extensions XSD file
Downloads the XML schema used for
additional CPL elements supported by the VCS.
You may wish to download the file in
order to take a backup copy of the
Administrator Policy, or you may want to
use the web-configured Administrator Policy as
a starting point for a more advanced CPL
script.
To configure Administrator Policy using a CPL
script:
VCS Configuration > Policy > Administrator • .
You will be taken to the Administrator Policy
page.