TANDBERG Security Camera - Manual (Page 70)

70
D14049.03
MAY 2008
Grey Headline (continued)
TANDBERG VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Introduction Getting Started
Overview and
Status
System
Configuration
VCS
Configuration
Zones and
Neighbors
Call
Processing
Bandwidth
Control
Firewall
Traversal
Maintenance Appendices
Registration Control
About External Registration
Credentials
The VCS may be required to authenticate itself
with another system. For example, when the
VCS is forwarding an invite from an endpoint
to another VCS, that other system may have
authentication enabled and will therefore
require your local VCS to provide it with a
username and password.
Additionally, traversal clients must always
successfully authenticate with traversal
servers before they can connect.
The username and password that your VCS
provides when authenticating with other
systems is configured under the
External
Registration Credentials section of the
Authentication Configuration page.
Authentication
Configuring External Registration Credentials
To configure Authentication options:
VCS Configuration > Authentication > Configuration •
You will be taken to the Authentication Configuration page (shown below).
xConfiguration Authenticatio • n
Authentication username
The Authentication Username is the name that
the VCS uses when authenticating with other
systems.
Authentication password
Specifies the password to be used by the
VCS (in conjunction with the Authentication
username) when the VCS is authenticating with
other systems.