TANDBERG Security Camera - Manual (Page 83)

83
D14049.03
MAY 2008
Grey Headline (continued)
TANDBERG VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Introduction Getting Started
Overview and
Status
System
Configuration
VCS
Configuration
Zones and
Neighbors
Call
Processing
Bandwidth
Control
Firewall
Traversal
Maintenance Appendices
Zones
Once you have created a new zone on the local
VCS you must configure it appropriately. For
traversal server zones, traversal client zones
and neighbor zones this will include providing
information about the neighbor system such as
IP address and ports.
Zones are configured via the
Edit Zone page.
You will be taken to this page automatically
upon creation of a new zone. To access this
page for an existing zone:
VCS Configuration > Zones • .
You will be taken to the Zones page.
Click on the name of the zone you wish to
configure.
You will be taken to the
Edit Zone page.
xConfiguration Zones Zone [1..200 • ]
The sections that follow describe the
configuration options available for each zone
type.
Adding Zones
Name
Enter the name you wish to give to this zone.
The name acts as a unique identifier, allowing
you to distinguish between zones of the same
type.
Type
From the Type drop-down menu, select the type
of zone you wish to add.
Once the zone has been created, the
Type
cannot be changed.
Create Zone
Click here to create the zone. You will be taken
directly to the
Edit Zone page.
In order to neighbor with another system (e.g.
VCS, gatekeeper or Border Controller) or create
an ENUM or DNS zone, you must add a new
zone on the local VCS. When adding a new
zone you will be asked to specify its
Type ; this
will determine which configuration options will
then be available.
To create a new zone:
VCS Configuration > Zones. •
You will be taken to the Zones page.
Click New .
You will be taken to the Create Zone page.
xCommand ZoneAd • d
Configuring Zones
Cancel
Click here to return to the Zones page without
creating the zone.