TANDBERG Security Camera - Manual (Page 157)

157
D14049.03
MAY 2008
Grey Headline (continued)
TANDBERG VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Introduction Getting Started
Overview and
Status
System
Configuration
VCS
Configuration
Zones and
Neighbors
Call
Processing
Bandwidth
Control
Firewall
Traversal
Maintenance Appendices
Configuring the VCS as a Traversal Server
Configuring Traversal Server Ports
Overview
The VCS Expressway has specific listening
ports used for firewall traversal. Rules must
be set on your firewall to allow connections to
these ports. In most cases the default ports
should be used. However, you have the option
to change these ports if necessary.
Media demultiplexing RTP port
Specifies the port on the VCS to be used for
demultiplexing RTP media.
Media demultiplexing RTCP port
Specifies the port on the VCS to be used for
demultiplexing RTCP media.
H.323 Assent call signaling port
Specifies the port on the VCS to be used for
Assent signaling.
H.323 H.460.18 call signaling port
Specifies the port on the VCS to be used for
H.460.18 signaling.
Save
Click here to save your settings.
To configure the VCS Expressway ports:
VCS Configuration > Expressway > Ports •
You will be taken to the Ports page.
xConfiguration Traversal Server •
Media Demultiplexing
xConfiguration Traversal Server
•
H.323