Ethernet, Overview, About ethernet speed – TANDBERG Security Camera User Manual
Page 49: Configuration, Ethernet speed
49
D14049.03
MAY 2008
Grey Headline (continued)
To configure the VCS’s Ethernet settings:
System Configuration >Ethernet
•
.
You will be taken to the
Ethernet
page.
About Ethernet Speed
The Ethernet speed setting determines the
speed of the connection between the VCS
and the ethernet switch. It must be set to the
same value on both systems.
The default is
Auto
, which means that the two
systems will auto-negotiate the appropriate
speed.
!
We recommend that you do not change
from the default value of
Auto
unless
the switch to which you are connecting
is unable to auto-negotiate. A mismatch in
Ethernet speed settings between the VCS and
ethernet switch will at best result in packet
loss; at worst it will make the system
inaccessible for endpoints and system
administrators.
Ethernet speed
Sets the speed of the connection between the
VCS and the ethernet switch.
If you have the Dual Network Interfaces option
key installed, you will be able to configure this
for both LAN1 and LAN2.
Save
Click here to save your changes.
Restart
Click here to restart the system.
You must save your changes and
restart the system for changes made
via this page to take effect.
Configuration
Overview
TANDBERG
VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Ethernet