Configuring a subzone, Edit subzone, Subzones – TANDBERG Security Camera User Manual
Page 134
134
D14049.03
MAY 2008
Grey Headline (continued)
TANDBERG
VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Subzones
Name
Enter the name you wish to assign to the subzone. You will refer
to this name when creating Links and Pipes.
Subnet 1
Enter the subnet IP
Address
and
Prefix
, This will define the
range of IP addresses that will belong to the first subnet in this
subzone.
Subnet 2 - 5
Use these fields to define up to 4 further subnets for this
Subzone.
Save
Click here to save your changes.
Bandwidth
See
Applying Bandwidth Limitations to Subzones
for a
description of these fields.
Configuring a Subzone
To configure a subzone:
VCS Configuration > Local Zone > Subzones
•
.
You will be taken to the
Subzones
page.
Click on the subzone you wish to configure.
You will be taken to the
Edit Subzone
page.
xConfiguration Zones LocalZone SubZon
Address range =
This shows the range of IP addresses that will be allocated to
this subzone, based on the combination of the subnet address
and prefix length that have been configured.