beautypg.com

TANDBERG Security Camera User Manual

Page 64

background image

64

D14049.03
MAY 2008

Grey Headline (continued)

TANDBERG

VIDEO COMMUNICATIONS SERVER

ADMINISTRATOR GUIDE

Introduction

Getting Started

Overview and

Status

System

Configuration

VCS

Configuration

Zones and

Neighbors

Call

Processing

Bandwidth

Control

Firewall

Traversal

Maintenance

Appendices

SIP

SIP mode

Determines whether or not the VCS will provide
SIP functionality (i.e. SIP Registrar and SIP
proxy services).

Registration expire delta

Specifies the period within which a SIP
endpoint must re-register to prevent its
registration expiring.
The default is

60

.

SIP registration proxy mode

Specifies how proxied registrations and invites
will be handled.

Off

: Registration requests will not be proxied

(but will still be permitted locally if the VCS is
authoritative for that domain). Invite requests
with existing Route Sets will be rejected.

Proxy to known only

: Registration requests will

be proxied, and invite requests will be proxied
only if the Route Set contains the URI(s) of
neighbors (including traversal clients and
traversal servers).

Proxy to any

: Registration requests and invite

requests will always be proxied.

UDP mode

Determines whether or not incoming SIP calls
using the UDP protocol will be allowed.
The default is

On

.

UDP port

Specifies the listening port for incoming SIP
calls over UDP.
The default is

5060

.

TCP mode

Determines whether or not incoming SIP calls
using the TCP protocol will be allowed.
The default is

On

.

TCP port

Specifies the listening port for incoming SIP
calls over TCP.
The default is

5060

.

TLS mode

Determines whether or not incoming SIP calls
using the TLS protocol will be allowed.
The default is

On

.

TLS port

Specifies the listening port for incoming SIP
calls over TLS.
The default is

5061

.

SIP settings are configured via:

VCS Configuration > Protocols > SIP >

Configuration

.

You will be taken to the

SIP

page.

xConfiguration SI

P

Configuring SIP - Registrations, Protocols and Ports

Save

Click here to save your changes.

TCP Outbound Port End

Specifies the upper port in the range to be
used by outbound TCP/TLS SIP connections.
The default is

29999

.

TCP Outbound Port Start

Specifies the lower port in the range to be used
by outbound TCP/TLS SIP connections.
The default is

25000

.