Message details field, Event log – TANDBERG Security Camera User Manual
Page 43
43
D14049.03
MAY 2008
Grey Headline (continued)
Field
Description
Event
The event which caused the log message to be generated. See
Events Logged
at Level 1
,
Events Logged at Level 2
and
Events Logged at Level 3
for lists of all
events that are logged by the VCS.
User
The username that was entered when a login attempt was made.
Protocol
Specifies which protocol was used for the communication.
Valid values are:
TCP
•
UDP
•
TLS.
•
Reason
Textual string containing any reason information associated with an event.
Service
Specifies which protocol was used for the communication.
A service entry is one of:
H323
•
SIP
•
H.225
•
H.245
•
LDAP
•
Q.931
•
NeighbourGatekeeper.
•
Message Type
Specifies the type of the message.
ResponseCode
SIP response code.
Src-ip
Specifies the source IP address (the IP address of the device attempting to
establish communications). This can be an IPv4 address or an IPv6 address.
Dst-ip
Specifies the destination IP address (the IP address of the destination for a
communication attempt).
The destination IP is recorded in the same format as
Src-ip
.
Field
Description
Dst-port
Specifies the destination port: the IP port of the destination for a
communication attempt.
Src-port
Specifies the source port: the IP port of the device attempting to establish
communications.
Src-Alias
If present, the first H.323 Alias associated with the originator of the message.
If present, the first E.164 Alias associated with the originator of the message.
Dst-Alias
If present, the first H.323 Alias associated with the recipient of the message.
If present, the first E.164 Alias associated with the recipient of the message.
Auth
Whether call attempt has been authenticated successfully.
Method
SIP method (INVITE, BYE, UPDATE, REGISTER, SUBSCRIBE, etc).
Contact
Contact: header from REGISTER.
AOR
Address of record.
Call-Id
The Call-ID header field uniquely identifies a particular invitation or all
registrations of a particular client.
To
(for REGISTER requests): the AOR for the REGISTER request.
RequestURI
The SIP or SIPS URI indicating the user or service to which this request is being
addressed.
NumBytes
The number of bytes sent/received in the message.
Duration
Request/granted registration expiry duration.
Time
A full UTC timestamp in YYYY/MM/DD-HH:MM:SS format. Using this format
permits simple ASCII text sorting/ordering to naturally sort by time. This is
included due to the limitations of standard syslog timestamps.
Level
The level of the event as defined in
Interpreting the Event Log
Message Details Field
For all messages logged from the
tvcs
process, the
message _
details
field, which contains the body of the message,
consists of a number of human-readable
name=value
pairs,
separated by a space.
The first field within the
message _ details
field is always
Event
and the last field is always
Level
.
The table below shows all the possible fields within the
message _ details
field, in the order that they would normally
appear, along with a description of each.
In addition to the events described below, a
syslog.info
event containing the string
MARK
will be
logged after each hour of inactivity to provide confirmation
that logging is still active.
TANDBERG
VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Event Log