Xconfiguration administratio, Xconfiguration authenticatio, Xconfiguration authentication – TANDBERG Security Camera User Manual
Page 191: Xconfiguration alternate, Command reference - xconfiguration
191
D14049.03
MAY 2008
Grey Headline (continued)
Administration HTTP Mode:
Determines whether HTTP calls will be redirected to the HTTPS port.
On
: calls will be redirected to HTTPS.
Off
: no HTTP access will be available.
Note: You must restart the system for any changes to take effect.
Default: On
Example:
xConfiguration Administration HTTP Mode: On
Administration HTTPS Mode:
Determines whether the VCS can be accessed via the web server. This must be
On
to enable both web interface and TMS access.
Note: You must restart the system for any changes to take effect.
Default: On
Example:
xConfiguration Administration HTTPS Mode: On
Administration SSH Mode:
Determines whether the VCS can be accessed via SSH and SCP.
Note: You must restart the system for any changes to take effect.
Default: On
Example:
xConfiguration Administration SSH Mode: On
Administration Telnet Mode:
Determines whether the VCS can be accessed via telnet.
Note: You must restart the system for any changes to take effect.
Default: Off
Example:
xConfiguration Administration Telnet Mode: Off
Administration TimeOut: <0..10000>
Sets the number of minutes that an administration session (HTTPS, Telnet or SSH) may be inactive before the session is timed out. A value of
0
turns session time outs off.
Default: 0
Example:
xConfiguration Administration TimeOut: 0
Alternates Alternate [1..5] Address:
Specifies the IP Address of an Alternate VCS. Up to 5 Alternates may be configured. When the VCS receives a Location Request, all Alternates will also be queried.
Note: must be a Valid IPv4 or IPv6 address
Example:
xConfiguration Alternates Alternate 1 Address: "10.13.0.2"
Authentication Credential [1..2500] Name:
Defines the name for this entry in the local authentication database.
Example:
xConfiguration Authentication Credential 1 Name: "john smith"
TANDBERG
VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Command Reference - xConfiguration