Command reference - xconfiguration – TANDBERG Security Camera User Manual

Page 196

196

D14049.03
MAY 2008

Grey Headline (continued)

H323 Gatekeeper CallSignaling PortRange End: <1024..65534>

Specifies the upper port in the range to be used by calls once they are established.
Default: 19999

Example:

xConfiguration H323 Gatekeeper CallSignaling PortRange End: 19999

H323 Gatekeeper CallSignaling PortRange Start: <1024..65534>

Specifies the lower port in the range to be used by calls once they are established.
Default: 15000

Example:

xConfiguration H323 Gatekeeper CallSignaling PortRange Start: 15000

H323 Gatekeeper CallSignaling TCP Port: <1024..65534>

Specifies the port that listens for H.323 call signaling.
Default: 1720

Example:

xConfiguration H323 Gatekeeper CallSignaling TCP Port: 1720

H323 Gatekeeper CallTimeToLive: <60..65534>

Specifies the interval (in seconds) at which the VCS polls the endpoints in a call to verify that they are still in the call.
Default: 120

Example:

xConfiguration H323 Gatekeeper CallTimeToLive: 120

H323 Gatekeeper Registration ConflictMode:

Determines how the system will behave if an endpoint attempts to register an alias currently registered from another IP Address.

Reject

: denies the registration.

Overwrite

: deletes the original registration and replaces it with the new registration.

Default: Reject

Example:

xConfiguration H323 Gatekeeper Registration ConflictMode: Reject

H323 Gatekeeper Registration UDP Port: <1024..65534>

Specifies the port to be used for H.323 UDP registrations.
Default: 1719

Example:

xConfiguration H323 Gatekeeper Registration UDP Port: 1719

H323 Gatekeeper TimeToLive: <60..65534>

Specifies the interval (in seconds) at which an H.323 endpoint must re-register with the VCS in order to confirm that it is still functioning.
Default: 1800

Example:

xConfiguration H323 Gatekeeper TimeToLive: 1800

TANDBERG

VIDEO COMMUNICATIONS SERVER

ADMINISTRATOR GUIDE

Command Reference - xConfiguration