Command reference - xconfiguration – TANDBERG Security Camera User Manual

Page 214

214

D14049.03
MAY 2008

Grey Headline (continued)

Zones Zone [1..200] TraversalServer TCPProbe RetryInterval: <1..65534>

Sets the frequency (in seconds ) with which the traversal client will send a TCP probe to the VCS.
Default: 2

Example:

xConfiguration Zones Zone 3 TraversalServer TCPProbe RetryInterval: 2

Zones Zone [1..200] TraversalServer UDPProbe KeepAliveInterval: <1..65534>

Sets the interval (in seconds) with which the traversal client will send a UDP probe to the VCS once a call is established, in order to keep the firewall’s NAT bindings open.
Default: 20

Example:

xConfiguration Zones Zone 3 TraversalServer UDPProbe KeepAliveInterval: 20

Zones Zone [1..200] TraversalServer UDPProbe RetryCount: <1..65534>

Sets the number of times the traversal client will attempt to send a UDP probe to the VCS.
Default: 5

Example:

xConfiguration Zones Zone 3 TraversalServer UDPProbe RetryCount: 5

Zones Zone [1..200] TraversalServer UDPProbe RetryInterval: <1..65534>

Sets the frequency (in seconds) with which the traversal client will send a UDP probe to the VCS.
Default: 2

Example:

xConfiguration Zones Zone 3 TraversalServer UDPProbe RetryInterval: 2

Zones Zone [1..200] Type:

Determines the nature of the specified zone, in relation to the Local VCS.

Neighbor

: the new zone will be a neighbor of the Local VCS.

TraversalClient

: there is a firewall between the zones, and the Local VCS is a traversal client of the new zone.

TraversalServer

: there is a firewall between the zones and the Local VCS is a traversal server for the new zone.

ENUM

: the new zone contains endpoints discoverable by ENUM lookup.

DNS

: the new zone contains endpoints discoverable by DNS lookup.

Example:

xConfiguration Zones Zone 1 Type: Neighbor

TANDBERG

VIDEO COMMUNICATIONS SERVER

ADMINISTRATOR GUIDE

Command Reference - xConfiguration