TANDBERG Security Camera - Manual (Page 96)

96
D14049.03
MAY 2008
Grey Headline (continued)
TANDBERG VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Introduction Getting Started
Overview and
Status
System
Configuration
VCS
Configuration
Zones and
Neighbors
Call
Processing
Bandwidth
Control
Firewall
Traversal
Maintenance Appendices
Administrator Policy
Enabling the use of Administrator Policy
To enable Administrator Policy:
VCS Configuration > Policy > Administrator • .
You will be taken to the Administrator Policy
page.
xConfiguration Policy •
AdministratorPolicy Mode
Administrator Policy Mode
On
: Administrator Policy is enabled. If a CPL
script has been uploaded, this policy will be
used. Otherwise, the policy configured via the
Administrator Policy section will be used.
Off : Administrator Policy is not in use.
Save
You must click here for any changes to the
Administrator Policy Mode to take effect.
Once you have enabled the use of
Administrator Policy, you must define
the policy to be used. This is done
either via the web interface or by uploading a
CPL script .
If Administrator Policy is on but a policy has
not been configured, then a default policy will
be applied that allows all calls, regardless of
source or destination.