Enter the 16-character Release Key that has
been provided to you. This is not required if
you are upgrading to a dot release, e.g. X2.0
to X2.1.
If you have cut and pasted the release key,
ensure there are no trailing white spaces.

Install Software

Click

Install Software

. You will be taken to the

System Upgrade

page.

When the upgrade is complete, this page will
refresh and you will see a message saying

software successfully upgraded

You must now restart the system for the
upgrade to take effect.

Select the software file

Enter the path of the software image file, or
click

Browse

to locate it on the network.

System Information

This section tells you about the
software and hardware that currently
make up your system.

Upgrading via the Web Interface

Before you start the upgrade, ensure
that the software image file for the new
version has been saved in a network

location that can be accessed via the web
interface. Also ensure that you have the
16-character Release Key readily available.

To upgrade your software via the web interface:

Maintenance > Upgrade

•

You will be taken to the

Upgrade

page.

You must restart the system after you
have uploaded the new software
version in order for the installation to

complete. Any configuration changes you make
between upload and restart will be lost, so we
recommend restarting your system
immediately.

Restart

You must restart your system before the new
software can be used.