Fallback alias, Overview, Configuration – TANDBERG Security Camera User Manual
Page 127: Example usage, Overview configuration example usage
127
D14049.03
MAY 2008
Grey Headline (continued)
TANDBERG
VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Fallback Alias
It is possible for the VCS to receive a call that
is destined for it but which does not specify
an alias. This could be for one of the following
reasons:
the caller has dialled the IP address of the
•
VCS directly
the caller has dialled the domain name
•
without giving an alias as a prefix
the caller has dialled the IP address or
•
domain name of the VCS prefixed by the
VCS’s system name as an alias.
Normally such calls would be disconnected.
However, the VCS allows you to specify an alias
to which all such calls should be routed. This
alias is known as the Fallback Alias.
You may wish to configure your Fallback
Alias to be that of your receptionist, so that
all calls that do not specify an alias will still
be answered personally and can then be
redirected appropriately.
For example, Example Inc. has the domain of
example.com
. The endpoint at reception has
the alias
.
They configure their VCS with a fallback alias
of
. This means
that any calls made directly to
example.com
(i.e. without being prefixed by an alias), are
forwarded to
, where
the receptionist answers the call and directs it
appropriately.
If no fallback alias is configured, calls
that do not specify an alias will be
disconnected.
Fallback alias
Enter the alias to which you want to forward all
calls that do not already specify an alias.
Overview
To configure the Fallback Alias:
VCS Configuration > Calls
•
.
You will be taken to the
Calls
page.
xConfiguration Call Services Fallback Alia
Some endpoints do not allow users to
enter an alias and an IP address to
which the call should be placed.
Save
Click here to save your changes.
Configuration
Example Usage