Xconfiguration zones localzone subzon, Command reference - xconfiguration – TANDBERG Security Camera User Manual

Page 206

206

D14049.03
MAY 2008

Grey Headline (continued)

Zones LocalZone DefaultSubZone Bandwidth PerCall Intra Mode:

Determines whether there is a limit on the bandwidth for any one call between two endpoints within the Default Subzone.

NoBandwidth

: no bandwidth available. No calls can be made within the Default Subzone.

Default: Unlimited

Example:

xConfiguration Zones LocalZone DefaultSubZone Bandwidth PerCall Intra Mode: Limited

Zones LocalZone DefaultSubZone Bandwidth Total Limit: <1..100000000>

Sets the total bandwidth limit (in kbps) of the Default Subzone (applies only if Mode is set to Limited).
Default: 500000

Example:

xConfiguration Zones LocalZone DefaultSubZone Bandwidth Total Limit: 500000

Zones LocalZone DefaultSubZone Bandwidth Total Mode:

Determines whether the Default Subzone has a limit on the total bandwidth being used by its endpoints at any one time.

NoBandwidth

: no bandwidth available. No calls can be made to, from, or within the Default Subzone.

Default: Unlimited

Example:

xConfiguration Zones LocalZone DefaultSubZone Bandwidth Total Mode: Limited

Zones LocalZone SubZone [1..100] Bandwidth PerCall Inter Limit: <1..100000000>

Specifies the bandwidth limit (in kbps) on any one call to or from an endpoint in this subzone (applies only if Mode is set to Limited).
Default: 1920

Example:

xConfiguration Zones LocalZone SubZone 1 Bandwidth PerCall Inter Limit: 1920

Zones LocalZone SubZone [1..100] Bandwidth PerCall Inter Mode:

Determines whether there is a limit on the bandwidth for any one call to or from an endpoint in this subzone.

NoBandwidth

: no bandwidth available. No calls can be made to or from this subzone.

Default: Unlimited

Example:

xConfiguration Zones LocalZone SubZone 1 Bandwidth PerCall Inter Mode: Limited

Zones LocalZone SubZone [1..100] Bandwidth PerCall Intra Limit: <1..100000000>

Specifies the bandwidth limit (in kbps) for any one call between two endpoints within this subzone (applies only if Mode is set to Limited).
Default: 1920

Example:

Zones LocalZone SubZone 1 Bandwidth PerCall Intra Limit: 1920

Zones LocalZone SubZone [1..100] Bandwidth PerCall Intra Mode:

Determines whether there is a limit on the bandwidth for any one call between two endpoints within this subzone.

NoBandwidth

: no bandwidth available. No calls can be made within this subzone.

Default: Unlimited

Example:

xConfiguration Zones LocalZone SubZone 1 Bandwidth PerCall Intra Mode: Limited

TANDBERG

VIDEO COMMUNICATIONS SERVER

ADMINISTRATOR GUIDE