Command reference - xconfiguration, Xconfiguration element subelement, Xcommand comman – TANDBERG Security Camera User Manual
Page 190: Command reference, Xconfiguration, Xconfiguration reference, Xconfiguration command referenc
190
D14049.03
MAY 2008
Grey Headline (continued)
The
xConfiguration
group of commands
are used to set and change individual items of
configuration. Each command is made up of
a main element followed by one or more sub-
elements.
The following pages list all the
xConfiguration
commands currently
available on the VCS.
To set a particular item of configuration, type
the command as shown. The valid values for
each command are indicated in the angle
brackets following each command; these are
explained opposite.
To obtain information about the existing
configuration on the VCS:
type
•
xConfiguration
to return all current
configuration settings for the VCS.
type
•
xConfiguration
to
return all current configuration for that
particular element and all its sub-elements.
type
•
xConfiguration
to return all current
configuration for that group of sub-elements.
To obtain information about using each of the
xConfiguration
commands:
type
•
xConfiguration ?
to return a
list of all elements available under the
xConfiguration
command.
type
•
xConfiguration
to
return all available sub-elements, along with
the valuespace and description, and default
values for each.
type
•
xConfiguration
to return all available
sub-elements, along with the valuespace
and description, and default values for each.
Overview
The valid value for this
command is a string. The
minimum and maximum
number of characters is
shown after the
S
.
When issuing this command,
the string must be typed in
double quotes.
The valid values for this
command are one of the
options shown within the
angle brackets.
The valid value for this
command is an integer. The
minimum and maximum
values are shown within the
angle brackets.
Square brackets indicate that
you can configure more than
one of this particular item.
Each item is assigned an
index within the range shown.
TANDBERG
VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Command Reference - xConfiguration