beautypg.com

Ip status – TANDBERG Security Camera User Manual

Page 28

background image

28

D14049.03
MAY 2008

Grey Headline (continued)

Understanding the IP Status Page

The

IP Status

page provides details of the IP

and DNS settings of the VCS.
To view the

IP Status

page:

Status > System > IP

Viewing the IP Status Page

IPv6 address

The IPv6 address configured on the VCS.
If the Dual Network Interfaces option key
has been installed, this will show the IPv6
addresses for both the LAN1 port and the
LAN2 port.

IPv4 gateway

The IPv4 gateway used by VCS.

IPv4 subnet mask

The IPv4 subnet mask configured on the VCS.
If the Dual Network Interfaces option key has
been installed, this will show the IPv4 subnet
masks for both the LAN1 port and the LAN2
port.

IPv4 address

The IPv4 address configured on the VCS.
If the Dual Network Interfaces option key
has been installed, this will show the IPv4
addresses for both the LAN1 port and the
LAN2 port.

Protocol

Indicates the IP protocol supported by the VCS.

IPv4

: The VCS will only accept registrations

from endpoints using an IPv4 address, and
will only take calls between two endpoints
or devices communicating via IPv4. It will
communicate with other systems via IPv4 only.

IPv6

: The VCS will only accept registrations

from endpoints using an IPv6 address, and
will only take calls between two endpoints
communicating via IPv6. It will communicate
with other systems via IPv6 only.

Both

: The VCS will accept registrations from

endpoints using either an IPv4 or IPv6 address,
and will take calls using either protocol. If a
call is between an IPv4-only and an IPv6-only
endpoint, the VCS will act as an IPv4 to IPv6
gateway (note that this will require a traversal
call licence). The VCS can communicate with
other systems via either protocol.

IPv6 gateway

The IPv6 gateway used by VCS.

Server 1..5 address

The IP address(es) of each of the DNS
servers that will be queried when resolving
domain names. Up to 5 DNS servers may be
configured.

Domain

Specifies the name to be appended to the
host name before a query to the DNS server is
executed.

TANDBERG

VIDEO COMMUNICATIONS SERVER

ADMINISTRATOR GUIDE

Introduction

Getting Started

Overview and

Status

System

Configuration

VCS

Configuration

Zones and

Neighbors

Call

Processing

Bandwidth

Control

Firewall

Traversal

Maintenance

Appendices

IP Status