Xconfiguration traversal server stun relay port, Command reference - xconfiguration – TANDBERG Security Camera User Manual

Page 205

205

D14049.03
MAY 2008

Grey Headline (continued)

Traversal Server STUN Discovery Port: <1024..65534>

Specifies the port to be used for STUN discovery services.
Default: 3478

Example:

xConfiguration Traversal Server STUN Discovery Port: 4678

Traversal Server STUN Relay Media Port End: <1024..65534>

Specifies the upper port in the range to be used for STUN media relay.
Default: 61200

Example:

xConfiguration Traversal Server STUN Relay Media Port End: 61200

Traversal Server STUN Relay Media Port Start: <1024..65534>

Specifies the lower port in the range to be used for STUN media relay.
Default: 60000

Example:

xConfiguration Traversal Server STUN Relay Media Port Start: 60000

Traversal Server STUN Relay Mode:

Determines whether the VCS will offer STUN relay services to traversal clients.
Default: On

Example:

xConfiguration Traversal Server STUN Relay Mode: On

Traversal Server STUN Relay Port: <1024..65534>

Specifies the listening port for STUN relay requests.
Default: 4678

Example:

Traversal Server STUN Relay Port: 4678

Zones LocalZone DefaultSubZone Bandwidth PerCall Inter Limit: <1..100000000>

Specifies the bandwidth limit (in kbps) for any one call to or from an endpoint in the Default Subzone (applies only if Mode is set to Limited).
Default: 1920

Example:

xConfiguration Zones LocalZone DefaultSubZone Bandwidth PerCall Inter Limit: 1920

Zones LocalZone DefaultSubZone Bandwidth PerCall Inter Mode:

Determines whether there is a limit on the bandwidth for any one call to or from an endpoint in the Default Subzone.

NoBandwidth

: no bandwidth available. No calls can be made to or from the Default Subzone.

Default: Unlimited

Example:

xConfiguration Zones LocalZone DefaultSubZone Bandwidth PerCall Inter Mode: Limited

Zones LocalZone DefaultSubZone Bandwidth PerCall Intra Limit: <1..100000000>

Specifies the bandwidth limit (in kbps) for any one call between two endpoints within the Default Subzone (applies only if Mode is set to Limited).
Default: 1920

Example:

xConfiguration Zones LocalZone DefaultSubZone Bandwidth PerCall Intra Limit: 1920

TANDBERG

VIDEO COMMUNICATIONS SERVER

ADMINISTRATOR GUIDE