Snmp, Overview, About snmp – TANDBERG Security Camera User Manual
Page 54: Configuration
54
D14049.03
MAY 2008
Grey Headline (continued)
About SNMP
Tools such as TANDBERG Management Suite
(TMS) or HP OpenView may act as SNMP
Network Management Systems (NMS). They
allow you to monitor your network devices,
including the VCS, for conditions that might
require administrative attention.
The VCS offers basic support for SNMP, and
supports Version 1 and Version 2c of the
SNMP protocol. The information provided by
the VCS is defined by SNMP MIB-2 and is:
system uptime
•
system name
•
location
•
contact.
•
To allow the VCS to be monitored by an SNMP
NMS, you must enable SNMP on the VCS and
provide the name of the
SNMP community
within which it resides. You may optionally
provide the name of a
System contact
and the
physical
Location
of the system for reference
by administrators when following up on queries.
By default, SNMP is
Enabled
with a
SNMP
community name
of
public
.
Note: the VCS does not support SNMP traps
or SNMP sets, therefore it cannot be managed
via SNMP.
To configure the VCS’s SNMP settings:
System Configuration > SNMP
•
You will be taken to the
SNMP
page.
Location
Specifies the physical location of the VCS.
Enabled
Select
On
to enable SNMP support.
SNMP community name
Sets the VCS’s SNMP community name.
System contact
Specifies the name of the person who can be
contacted regarding issues with the VCS.
Save
Click here to save your changes.
Restart
Click here to restart the system.
You must save your changes and
restart the system for any changes to
take effect.
Configuration
Overview
TANDBERG
VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
SNMP