TANDBERG Security Camera - Manual (Page 140)

140
D14049.03
MAY 2008
Grey Headline (continued)
TANDBERG VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Introduction Getting Started
Overview and
Status
System
Configuration
VCS
Configuration
Zones and
Neighbors
Call
Processing
Bandwidth
Control
Firewall
Traversal
Maintenance Appendices
Pipes
Editing Pipes
Editing an Existing Pipe
To configure details of a pipe:
VCS Configuration > Bandwidth > Pipes •
You will be taken to the Pipes page.
Click on the pipe you wish to configure.
You will be taken to the
Edit Pipe page.
xConfiguration Bandwidth Pip • e
Name
Enter the name you wish to give to this pipe.
You will refer to this name when creating links.
Save
Click here to save the changes.
Bandwidth restriction
Determines whether there is a limit on the total
concurrent bandwidth of this pipe.
Unlimited : no limitations are in place.
Limited : there is a limit in place; you must
enter the limit in the field below.
NoBandwidth : there is no bandwidth available.
Total bandwidth limit (kbps)
Sets the limit on the total concurrent
bandwidth of this pipe.
Bandwidth restriction
Determines whether there is a limit on the
bandwidth of individual calls via this pipe.
Unlimited : no limitations are in place.
Limited : there is a limit in place; you must
enter the limit in the field below.
NoBandwidth : there is no bandwidth available.
Per call bandwidth (kbps)
Sets the limit on the bandwidth of individual
calls via this pipe.
Delete
Click here to delete the pipe.