Xconfiguration i, Xconfiguration ip route, Xconfiguration ip dn – TANDBERG Security Camera User Manual
Page 197: Xconfiguration interworking mod, Xconfiguration ip dns serve, Command reference - xconfiguration
197
D14049.03
MAY 2008
Grey Headline (continued)
H323 Mode:
Determines whether or not the VCS will provide H.323 gatekeeper functionality.
Default: On
Example:
xConfiguration H323 Mode: On
Interworking Encryption Mode:
Determines whether or not the VCS will allow encrypted calls between SIP and H.323 endpoints.
Off
: interworked calls will never be encrypted.
Auto
: interworked calls will be encrypted if the endpoints request it.
Default: Auto
Example:
xConfiguration Interworking Encryption Mode: Auto
Interworking Mode:
Determines whether or not the VCS will act as a gateway between SIP and H.323 calls.
Off
: the VCS will not act as a SIP-H.323 gateway.
RegisteredOnly
: the VCS will act as a SIP-H.323 gateway but only if at least one of the endpoints is locally registered.
On
: the VCS will act as SIP-H.323 gateway regardless of whether the endpoints are locally registered.
Default: RegisteredOnly
Example:
xConfiguration Interworking Mode: RegisteredOnly
IP DNS Domain Name:
Specifies the name to be appended to the host name before a query to the DNS server is executed. Used only when attempting to resolve a domain name which is not fully qualified for NTP,
LDAP, External Manager and Log servers.
Example:
xConfiguration IP DNS Domain Name: "example.net"
IP DNS Server [1..5] Address:
Sets the IP Address of up to 5 DNS servers to be used when resolving domain names.
Example:
xConfiguration IP DNS Server 1 Address: "192.168.12.0"
IP Gateway:
Specifies the IPv4 gateway of the VCS.
Note: You must restart the system for any changes to take effect.
Default: 127.0.0.1
Example:
xConfiguration IP Gateway: 192.168.127.0
IP Route [1..10] Address:
Specifies an IP Address used in conjunction with the Prefix Length to determine the network to which this route applies.
Example:
xConfiguration IP Route 1 Address: "128.168.0.0"
TANDBERG
VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Command Reference - xConfiguration