TANDBERG Security Camera - Manual (Page 14)

14
D14049.03
MAY 2008
Grey Headline (continued)
The following features have been introduced in version X2.0 of
the VCS software:
Dual Network Interfaces
Allows the VCS Expressway to connect to two separate
networks in a DMZ deployment.
Easier to manage, quicker to deploy
Increased usability of the administration web interface.
Improved feature parity between H323 & SIP
Encryption supported for H323 – SIP gateway calls.
Dual video support for H323 – SIP gateway calls.
Improved diagnostic capabilities
Standard Features
H.323 gatekeeper •
SIP Proxy/Registrar •
SIP and H.323 support, including SIP/H.323 gatewaying •
IPv4 and IPv6 support, including IPv4/IPv6 gatewaying •
Bandwidth management on both a per-call and a total usage •
basis, configurable separately for calls within the local
subzones and to neighboring systems and zones
Automatic downspeeding option for calls that exceed the
•
available bandwidth
URI and ENUM dialing via DNS, enabling global connectivity
•
Up to 2500 registrations •
Up to 500 non-traversal calls •
Up to 100 traversal calls •
Up to 200 neighboring zones •
Flexible zone configuration with prefix, suffix and regex support •
Can function as a stand-alone VCS or be neighbored with •
other systems such as VCSs, Border Controllers, gatekeepers
and SIP proxies
Supports up to 5 Alternate VCSs for redundancy purposes
•
Optional endpoint authentication •
Control over which endpoints are allowed to register •
Administrator Policy including support for CPL •
Embedded setup wizard via a serial port for initial configuration •
System administration via a web interface or RS-232, Telnet, •
SSH, and HTTPS
Can be managed with TANDBERG Management Suite 11.8 or
•
newer
What’s New in this Version?
Dual Network Interfaces
Enables the LAN 2 ethernet port on the VCS Expressway, allowing
you to have a secondary IP address for your VCS.
This configuration is intended for high-security deployments
where the VCS Expressway is located in a DMZ between two
separate firewalls on separate network segments.
User Policy (FindMe™)
A unique industry solution that gives individual video users
a single alias on which they can be contacted regardless
of location. Users have the ability to log on to a Web-based
interface and control where and how they are contacted.
Optional Features
TANDBERG VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Introduction Getting Started
Overview and
Status
System
Configuration
VCS
Configuration
Zones and
Neighbors
Call
Processing
Bandwidth
Control
Firewall
Traversal
Maintenance Appendices
The TANDBERG VCS