Ricoh Aficio 2018D - Manual (Page 738)

Appendix
116
9
IEEE 802.11b TX Rate The IEEE 802.11b transmitting speed (set
speed) is displayed.
(Example: current Tx Rate is 11 Mbps.)
IEEE 802.11b Tx Rate 11 Mbps
Transmission speeds vary depending on sig-
nal quality. Displayed values may differ from
actual transmission speed.
inetd start. An inetd has started.
started with IP: has been set for and
started.
: Subnet overlap. Subnet from Netmask and the IP address you
tried to set for overlap the subnet
of another interface.
Set Subnet so it does not overlap with another
interface.
IPP cancel-job: permission denied. The printer could not authenticate the name of
the user attempting to cancel a job.
ipp disable. Printing with ipp is disabled.
ipp enable. Printing with ipp is enabled.
IPP job canceled. jobid=%d. The spooled job has been canceled due to er-
ror or user request.
job canceled. jobid=%d. The spooled job has been canceled due to er-
ror or user request.
LeaseTime=(sec), RenewTime=
(sec). The resource lease time received from the
DHCP server is in seconds. The
renewal time is also in seconds.
Login to fileserver
(,) (In print server mode) Logged on to the file
server with NDS or BINDERY mode.
multid start. Data transmission service for multiprotocols
has started.
Name registration failed. name=name> The printer could not register the name of
NetBIOS.
Name registration success in Broadcast
name= The NetBIOS name was successfully regis-
tered from a broadcast.
Name registration success. WINS Server=
NetBIOS
Name= The NetBIOS name was successfully regis-
tered to the WINS server.
nbstart start.(NetBEUI) The server for setting the NetBEUI protocol
stack has started.
nbtd start. nbtd (NetBIOS over TCP/IP Daemon) has
started. (Available only in DHCP mode)
Message Causes and solutions