Ricoh Aficio 2018D User Manual
Page 604
Appendix
110
9
❖
❖
❖
❖ ADF or ARDF
Limitation
❒ There may be a difference in the size of the image when it is printed at the des-
tination.
❒ If you place an original larger than A3, 11"×17" on the exposure glass, only an
A3, 11"
×17" area is scanned.
Note
❒ Even if an original is correctly placed on the exposure glass or in the
ADF/ARDF, a vertcal margin of 3 mm (0.1") and a horizontal margin of 2 mm
(0.8") may not be sent.
❒ The machine detects paper sizes in the following ways:
• When you place an original in the ADF or ARDF, an original wider than
about 264 mm (10.4") is scanned as A3, 11"
×17" size.
An original narrower than about 230 mm (9.1") will be sent as 8
1
/
2
"
×11" or
8
1
/
2
"
×14" size, and an original narrower than about 264 mm (10.4”) is
scanned as B4 JIS.
Originals up to 1,200 mm (47.2") in length can be scanned.
• Refer to the table below for sizes the machine can detect when you place
an original on the exposure glass. Because the machine scans non-standard
size documents in a standard size, part of the image may be truncated de-
pending on the length of the document.
❖
❖
❖
❖ Metric Version
Length
*1
-249 mm
249 mm-274 mm 274 mm-316 mm
316 mm-
Wi
dth
-243 mm
×
B5 JIS
L
A4
L
F
L
243 mm-
268 mm
B5 JIS
K
B4 JIS
L
B4 JIS
L
B4 JIS
L
268 mm-
A4
K
A3
L
A3
L
A3
L
Kir-C2-AEcombine_F_FM.book Page 110 Monday, September 29, 2003 11:39 AM