Ricoh Aficio 2018D - Manual (Page 687)

SmartDeviceMonitor for Client
65
6
Setting the Network Monitoring Function
To view the status of machines using SmartDeviceMonitor for Client, you must
configure SmartDeviceMonitor for Client in advance, so that it monitors the ma-
chine whose status you want to view.
AAAA
Start SmartDeviceMonitor for Client.
The SmartDeviceMonitor for Client icon appears at the right end of the taskbar.
BBBB
Right-click the SmartDeviceMonitor for Client icon, and check the desired
machine is on the shortcut menu that appears.
For details about the machine status icon, see SmartDeviceMonitor for Client
Help.
CCCC
If the desired machine does not appear, click [Options...] on the shortcut
menu.
The [SmartDeviceMonitor for Client - Options] dialog box appears.
DDDD
Select the machine to be monitored, and select the [To be Monitored] check
box.
Note
❒ Selecting the [Displayed on Task Bar] check box will bring up the status of a
machine on the SmartDeviceMonitor for Client icon on the taskbar.
EEEE
Click [OK].
The dialog box closes and the selected machine is monitored.
Displaying the Status of Machines
Follow the procedure below to monitor machine status using SmartDeviceMon-
itor for Client.
AAAA
Start SmartDeviceMonitor for Client.
BBBB
The status of machines is displayed on the SmartDeviceMonitor for Client
icon on the taskbar.
Note
❒ For more information about status icons, see SmartDeviceMonitor for Cli-
ent Help.
CCCC
For further information on status, right-click the SmartDeviceMonitor for
Client icon, and then select the desired machine.
The status of the machine is displayed in the dialog box.
Note
❒ For more information about each item in the dialog box, see SmartDevice-
Monitor for Client Help.