Ricoh Aficio 2018D - Manual (Page 739)

Message List
117
9
NetBEUI Computer Name = The NetBEUI Computer Name is defined as
.
nmsd start. (NetBEUI) nmsd (Name Server Daemon) has started.
nprinter start. (NetWare) (In remote printer mode) NetWare service has
started.
nwstart start. (NetWare) The service for NetWare protocol stack setting
has started.
Open log file (In print server mode) The specified log file
has been opened.
papd start. (Apple Talk) Apple Talk print service has started.
permission denied. Job cancellation was determined to be unau-
thorized after checking the user name and
host address (except for ROOT authorization).
phy release file open failed. A replacement network interface board is re-
quired. Contact your sales or service repre-
sentatives.
Print queue cannot be
serviced by printer 0, (In print server mode) The print queue name
cannot be serviced. Make sure that print
queue volume is on the specified file server.
Print server has no print-
er. (In print server mode) The printer is not as-
signed to the print server name>. Using NWadmin, assign the printer,
and then restart the printer device.
Print sessions full Cannot accept the print session.
Printer has no queue. (In print server mode) The print queue is not
assigned to the printer. Using NWadmin, as-
sign the print queue to the printer, and then
restart it.
pserver start. (NetWare) (In print server mode) NetWare service has
started.
Required computer name ()
is duplicated name. The same computer name is detected on the
network. The start job determines the compu-
ter name by adding it to the suffix (0,1....).
Configure a new computer name that is
unique.
Required file server () not
found. Cannot find the required file server.
restarted. LPD has started.
sap enable, saptype=, sapname=
The SAP function has started. The SAP (SAP
type and SAP name) packet is issued to adver-
tise the service on the NetWare server SAP ta-
ble.
Message Causes and solutions