Ricoh Aficio 2018D - Manual (Page 592)

Key Operator Setting
98
7
Selecting Dial/Push Phone
Use this function to select a line type.
Dial and Push lines are available for
selection.
Note
❒ This function is not available in
some areas.
AAAA
Press the
{{{{User Tools/Counter}}}} key.
BBBB
Select [Fax Features] using
{{{{U U U U}}}} or
{{{{T T T T}}}}, and then press the {{{{OK}}}} key.
CCCC
Select [Key Operator Tools] using
{{{{U U U U}}}} or {{{{T T T T}}}}, and then press the
{{{{OK}}}} key.
DDDD
Select [Select Dial/Push Phone] us-
ing
{{{{U U U U}}}} or {{{{T T T T}}}}, and then press the
{{{{OK}}}} key.
EEEE
Select [Push Phone] or [Dial Phone]
using
{{{{U U U U}}}} or {{{{T T T T}}}}, and then press
the
{{{{OK}}}} key.
The display returns to that of step
D .
Reference
p.106 “Selecting the Line Type”
FFFF
Press the
{{{{User Tools/Counter}}}} key.
The standby display appears.
G3 Analog Line
You need to make the following set-
tings for the G3 Analog Line before
you connect the machine to a stand-
ard G3 analog line.
• When your machine is connected
through a PABX, set to Extension.
If it is connected directly to the tel-
ephone network, set to Outside.
• Outside Access Number
Use this setting if your machine is
connected to a PABX that requires
you to dial a certain number such
as "0" followed by a pause to con-
nect to the outside line. By pro-
gramming "0" as the PSTN Access
Number, a pause will be inserted
automatically after the "0" when
dialing.
Important
❒ The set Outside Access Number is
not used for the dialing using the
{{{{On Hook}}}} key or an external tele-
phone.
AAN215F
On Hook Dial On Hook Dial
_
Clear
Modes
User Tools/
Counter
Clear/Stop
Kir-C2-AEcombine_F_FM.book Page 98 Monday, September 29, 2003 11:39 AM