Ricoh Aficio 2018D User Manual
Page 572
Key Operator Setting
78
7
Note
❒ If there is an End Receiver already
programmed, a receiver name is
shown. If you want to change the
receiver, press the
{{{{Clear/Stop}}}}
key and proceed to step
F.
❒ To cancel Forwarding, press the
{{{{Cancel}}}} key and proceed to
step
G
.
FFFF
Specify an End Receiver using the
Quick Dial key or searching by
the destination list, and then
press the
{{{{OK}}}} key.
See p.34 “Searching for a Destina-
tion”, Facsimile Reference
GGGG
Press the
{{{{User Tools/Counter}}}} key.
The standby display appears.
Quitting the forwarding function
AAAA
Press the
{{{{User Tools/Counter}}}} key.
BBBB
Select [Fax Features] using
{{{{U
U
U
U}}}} or
{{{{T
T
T
T}}}}, and then press the {{{{OK}}}} key.
CCCC
Select [Key Operator Tools] using
{{{{U
U
U
U}}}} or {{{{T
T
T
T}}}}, and then press the
{{{{OK}}}} key.
DDDD
Select [Forwarding] using
{{{{U
U
U
U}}}} or
{{{{T
T
T
T}}}}, and then press the {{{{OK}}}} key.
EEEE
Select [Off], using
{{{{U
U
U
U}}}} or {{{{T
T
T
T}}}}, and
then press the
{{{{OK}}}} key.
FFFF
Press the
{{{{User Tools/Counter}}}} key.
The standby display appears.
Forwarding Mark
You can print a Forwarding Mark on
the receiver's messages that have
been forwarded.
The receiver can distinguish between
forwarded messages and usual recep-
tions.
Note
❒ You can specify whether or not to
print a Forwarding Mark in the
User Parameters. See p.80 “User
Parameters” (switch 02, bit 0).
AAN215F
On Hook Dial
On Hook Dial
_
Clear
Modes
User Tools/
Counter
Clear/Stop
Kir-C2-AEcombine_F_FM.book Page 78 Monday, September 29, 2003 11:39 AM