Ricoh Aficio 2018D - Manual (Page 432)

Faxing
22
2
Reference
p.11 “Placing Originals”.
CCCC
Select the scan settings you re-
quire.
Reference
p.25 “Scan Settings”
p.26 “Original Type”
p.27 “Image Density (Con-
trast)”
DDDD
Specify a destination.
Note
❒ If you make a mistake, press the
{{{{Clear/Stop}}}} key, and then enter
the correct number.
Reference
p.29 “Specifying a Destination”
p.31 “Using the Destination
List”
p.25 “Chain Dial”, Facsimile Ref-
erence
p.26 “Redial”, Facsimile Refer-
ence
EEEE
Press the
{{{{Start}}}} key.
The machine calls the destination.
While it is dialing, the number or
name which is programmed as the
Own Name or Own Fax Number
in the machine of the other party is
shown on the display. When con-
nected, the machine starts scan-
ning the original.
Note
❒ Do not lift the ADF or ARDF
during scanning.
After transmission, the standby
display appears.
AAN207F
On Hook Dial On Hook Dial
Pause/
Redial
_
Clear/Stop
Start
Kir-C2-AEcombine_F_FM.book Page 22 Monday, September 29, 2003 11:36 AM