beautypg.com

Ricoh Aficio 2018D User Manual

Page 337

background image

Installing the Software

33

2

❒ SCSI print must be enabled using

the control panel. See "Interface
Settings/IEEE 1394", Network
Guide
.

❒ SCSI print using the optional IEEE

1394 interface board is not sup-
ported by Windows 95/98/Me, or
Windows NT 4.0. If the “plug and
play” function starts, click [Cancel]
in the [New Hardware Found] or [De-
vice Driver Wizard]

dialog box.

Note

❒ If [Found New Hardware Wizard] ap-

pears every time the computer is
started or the cable is connected
with Windows 2000/XP or Win-
dows Server 2003, when the print-
er function that uses SCSI print is
not installed, disable the device.
See p.34 “Disabling the Device” for
more information.

❒ If you send data from your compu-

ter when data is being received
from another client computer,
your data will be printed after
completing the print job for the
other client computer.

❒ When the machine is connected to

the computer properly via the 1394
interface, the appearance of the
icon in the printer window chang-
es.

Windows 2000

Important

❒ In Windows 2000, the optional

IEEE 1394 interface board can only
be used with Service Pack 1 or lat-
er. If the Service Pack is not in-
stalled, the connectable number of
devices in an IEEE 1394 bus is only
one, and the client cannot access
the IEEE 1394 interface board with-
out using an account that has Ad-
ministrator permission.

AAAA

Connect the machine and compu-
ter using the IEEE 1394 interface
cable.
The [Found New Hardware Wizard] di-
alog box appears.

BBBB

Click [Next].
“This wizard will complete the in-
stallation for this Device: Un-
known” appears.

CCCC

Select [Optional search locations:],
and then click [Next].

DDDD

When “Locate Driver Files” ap-
pears, select the [Optional search lo-
cations.]

check box and the [Specify

a location]

check box, and then

click [Next].

EEEE

Hold down the left

{{{{SHIFT}}}} key

and insert the CD-ROM into the
CD-ROM drive.
Keep the left

{{{{SHIFT}}}} key held

down until the computer has fin-
ished accessing the CD-ROM.
If the Auto Run program starts,
click [Cancel], and then click [Exit].

FFFF

Click [Browse].

KirC2-GB-Pref1-F_FM.book Page 33 Monday, September 8, 2003 2:43 PM

This manual is related to the following products: