Ricoh Aficio 2018D - Manual (Page 736)

Appendix
114
9
Cannot find rprinter (/
) Check the printer number registered in the
print server.
Change IP address from DHCP Server. The IP address changes when DHCP LEASE is
renewed. To always assign the same IP ad-
dress, set a static IP address to the DHCP serv-
er.
child process exec error! (process name) The network service failed to start. Turn the
printer off and then on. If this does not work,
contact your service or sales representatives.
Connected DHCP Server (dress>). The IP address was successfully received from
the DHCP server.
connection from Logged on from the host
Could not attach to PServer name> When using a remote printer: Cannot connect
to the print server. The print server is rejecting
the connection for some reason. Check the
print server settings.
Could not attach to FileServer When using a remote printer: Cannot connect
to the file server. The file server is rejecting the
connection for some reason. Check the file
server settings.
Current Interface Speed:xxxMbps The speed of the network (10 Mbps or 100 Mb-
ps)
Current IP address The IP address was re-
ceived from the DHCP server.
Current IPX address The current IPX address
DHCP lease time expired. DHCP lease time has expired. The printer tries
to locate the DHCP server again. The IP ad-
dress used till now becomes invalid.
DHCP server not found. The DHCP server cannot be found. Make sure
the DHCP server is running on the network.
dhcpcd start. A dhcpcd (DHCP client server) has started.
Duplicate IP=(from dress>). The same IP address is used. Every IP address
must be unique. Check the address of the de-
vice indicated in .
Established SPX Connection with PServer,
(RPSocket=, connID =nection ID>) (In remote printer mode) A connection with
the print server has been established.
exiting lpd service has ended and the system is clos-
ing down.
Exit pserver (In print server mode) Exits the print server
because necessary print server settings have
not been made.
Message Causes and solutions