Using the mixer screen, Selecting a part, Selecting the sound for a part – Roland Fantom-Xa User Manual
Page 70: Editing the part settings, View the performance mode’s mixer screen (p. 70), Using the patch select screen, 70 playing in performance mode
70
Playing in Performance Mode
The currently selected part is called the “current part.”
1.
In the PERFORM MIXER screen, press [CURSOR] to move
the cursor to the Part number.
fig.PartSelect2
2.
Use the VALUE dial or [INC] [DEC] to select the part.
You can also select the part by pressing [SELECT] to make it
light and pressing PART/TRACK [1]–[8].
*
To select parts 9–16, press [9-16] to make it light, and then press
PART/TRACK [1]–[8].
You can switch the patch that is assigned to a part.
1.
Select the part whose sound you want to switch.
2.
Press [CURSOR] to move the cursor to the patch number or
patch group.
fig.PatchNumSelect
3.
Use the VALUE dial or [INC] [DEC] to select a patch.
Selecting the Rhythm Set
1.
Select a part.
2.
Press [CURSOR] to move the cursor to the following
location.
fig.PatchType
3.
Use the VALUE dial or [INC] [DEC] to select “RHY.”
The rhythm set will be selected.
fig.PatchType2
Using the PATCH SELECT screen
1.
Select the part whose sound you want to switch.
2.
Press [PATCH SELECT].
The PATCH SELECT screen appears.
fig.PatchSelectPfm
3.
To select a rhythm set, press [F5 (RHYTHM)] to add a check
mark (
✔
).
If you add a mark, the RHYTHM SELECT screen appears.
4.
Press [F1] or [F2] to select a group.
5.
Use [F3], [F4], PART/TRACK [1]–[8], [INC] [DEC],
,
or the VALUE dial to select a patch/rhythm set.
6.
Press [ENTER] to return to the PERFORM LAYER screen.
In the PERFORM MIXER screen you can set the following
parameters for each part.
1.
Press [MIXER].
The PERFORM MIXER screen appears.
2.
Press [F1 (LEVEL)]–[F6 (PART-OUT)] to select the
parameter.
3.
Press [CURSOR] to select the part.
fig.PartEdit
4.
Use the VALUE dial or [INC] [DEC] to change the setting.
Using the MIXER Screen
Selecting a Part
Selecting the Sound for a Part
Editing the Part Settings
Parameter
(Function Button)
Explanation
[F1 (LEVEL)]
Volume of each part (Level, p. 73)
[F2 (PAN)]
Left/right position of each part
(Pan, p. 73)
[F3 (CHORUS)]
Level of the signal sent to chorus
for each part (Chorus, p. 74)
[F4 (REVERB)]
Level of the signal sent to reverb for
each part (Reverb, p. 74)
[F5 (KEY SFT)]
Pitch of the part’s sound (in semi-
tones, +/-4 octaves) (Coarse, p. 74)
[F6 (PART-OUT)]
KBD
PAD
ARP
OUT
Fantom-Xa_e.book 70 ページ ２００４年１０月２２日 金曜日 午後２時３分