beautypg.com

Initializing rhythm set settings, Copying rhythm tone settings, 56 creating a rhythm set – Roland Fantom-Xa User Manual

Page 56

background image

56

Creating a Rhythm Set

“Initialize” means to return the settings of the currently selected
sound to a standard set of values.

*

The Initialize operation will affect only the currently selected sound;
the sounds that are stored in user memory will not be affected. If you
wish to restore all of the Fantom-Xa’s settings to their factory values,
perform a Factory Reset (p. 203).

1.

Press [PATCH/RHYTHM] to access the PATCH PLAY

screen.

2.

Select the part (keyboard or pad) and rhythm set that you

want to initialize (p. 30).

3.

Press [PATCH EDIT] to access the RHYTHM EDIT screen.

Press keys to specify the key that is to be initialized.

4.

Hold down [SHIFT] and press [F5 (INIT)].

The Rhythm Initialize window appears.

fig.RhythmInit

5.

Press

to select the initialization type.

All:

All keys of the rhythm set will be initialized.

Key:

One key will be initialized.

6.

Press [F6 (SELECT)].

A message will ask you for confirmation.

7.

Press [F6 (EXEC)].

The initialization will be carried out.

*

To cancel, press [F5 (CANCEL)].

This operation copies the settings of any desired rhythm set to the
currently selected rhythm set.

1.

Press [PATCH/RHYTHM] to access the PATCH PLAY

screen.

2.

Select the part (keyboard or pad) and the copy-destination

rhythm set (p. 30).

3.

Press [PATCH EDIT] to access the RHYTHM EDIT screen.

4.

Hold down [SHIFT] and press [F6 (TONE CPY)].

The Rhythm Tone Copy window appears.

fig.RhyToneCopy

5.

Press [CURSOR] to move the cursor, and use the VALUE

dial or [INC] [DEC] to select the “Source (copy-source)”
group and number, and the rhythm tone number.

*

By pressing [F4 (COMPR)] to add a check mark (

), you can check

the copy-source rhythm set (Compare function).

6.

Press [CURSOR] to move the cursor, and select the

“Destination (copy-destination)” rhythm tone number.

7.

Press [F6 (EXEC)].

A message will ask you for confirmation.

8.

Press [F6 (EXEC)] to execute the copy operation.

*

To cancel, press [F5 (CANCEL)].

Initializing Rhythm Set Settings

Copying Rhythm Tone Settings

The Compare Function

For the Rhythm Tone Copy operations, you can use the
Compare function.

If you want to play the copy-source rhythm set, press [F4
(COMPR)] to add a check mark (

✔). Now you can play the

copy-source rhythm set from the keyboard or pads.

*

The rhythm set auditioned using the Compare function may
sound slightly different than when it is played normally.

Fantom-Xa_e.book 56 ページ 2004年10月22日 金曜日 午後2時3分