Roland Fantom-Xa - Manual (Page 136)

136
Editing Songs
This function erases all the sequencer data inside the specified area.
As the erased data is replaced by rests, the original measures will
remain.
For details on the settings, refer to Basic Operation for Track
Editing (p. 133).
fig.Erase
This function deletes a specified area of sequencer data, and moves
the subsequent data to fill the gap. As a result, the measure length
will be shortened by the number of deleted measures.
For details on the settings, refer to Basic Operation for Track
Editing (p. 133).
fig.Delete
Erasing Unwanted Performance
Data (Erase)
Parameter Value Explanation
Track/Pattern TRK ALL,
TRK 1–16,
TEMPO,
PTN001–100 Track(s) or pattern to be
erased
TRK ALL: Phrase tracks 1–16, the beat track,
and the tempo track
TRK 1–16: Specified phrase track
TEMPO: Tempo track
PTN001–100: Specified pattern
Ch/Part ALL, Ch 1–16 MIDI channel of the data
to be erased
ALL: Erases all sequencer data.
Ch 1–16: Erases sequencer data of one spe-
cific MIDI channel only.
* If you set “Track” to “TEMPO,” or if “Status” is
set to “System Exclusive,” “Tune Request” or
“Pattern Call,” this parameter will not be avail-
able.
Measure 0001– Range of measures to be
erased
If you set “For” to
“ALL,” all measures
will be specified.
For 1–ALL
Status ALL, Note,
Poly Aftertouch,
Control Change,
Program Change,
Channel After-
touch, Pitch Bend,
System Exclusive,
Tune Request,
Pattern Call Type of data to be erased
* If “Track” is set to
“TEMPO,” this parame-
ter will not be available.
When “Status” is “Note” or “Poly Aftertouch”
Range Min 0 (C -)–127 (G9) Range of note numbers to
be erased
You can also specify
the key range by press-
ing keys on the key-
board.
Range Max
When “Status” is “Control Change”
Range Min 0–127 Range of controller num-
bers to be erased
Range Max
When “Status” is “Program Change”
Range Min 1–128 Range of program num-
bers to be erased
Range Max
Deleting Unwanted Measures
(Delete)
Parameter Value Explanation
Track/Pattern TRK ALL,
TRK 1–16,
TEMPO,
PTN001–100 Track(s) or pattern to be
deleted
TRK ALL: Phrase tracks 1–16, the beat track,
and the tempo track
TRK 1–16: Specified phrase track
TEMPO: Tempo track
PTN001–100: Specified pattern
Measure 0001– Range of measures to be
deleted
If you set “For” to
“ALL,” all measures will
be specified.
For 1–ALL
Fantom-Xa_e.book 136 ページ ２００４年１０月２２日 金曜日 午後２時３分