Roland Fantom-Xa - Manual (Page 155)

155
Playing a Phrase at the Touch of a Finger (RPS)
* Pattern parameter, Playback Mode parameter, and Mute Group parameter are set for each key. Although the Fantom-Xa has a 61-note keyboard, you can
also make settings for all keys in the range of A-1 to G9. Settings for the Trigger Quantize parameter and Velocity Sens parameter are for the entire song.
Parameter Value Explanation
[F1 (COMMON)]
Trigger Quantize REAL, BEAT,
MEASURE Specifies how pattern playback is to begin when a key is pressed during song playback or recording.
REAL: The pattern will begin playing at the moment you press the key.
BEAT: If the song is being played or recorded, the pattern will begin playing at the beginning of the
next beat if you press the key in the middle of the beat.
MEASURE: If the song is being played or recorded, the pattern will begin playing at the beginning
of the next measure if you press the key in the middle of the measure.
Velocity Sens OFF, LOW, MID,
HIGH Turn this “OFF” if you want the pattern to play back at the volume at which it was recorded.
If you want to vary the pattern playback volume according to the strength with which you pressed
the key, select either “LOW,” “MID,” or “HIGH.”
[F2 (KEY)] [F3 (PAD)]
KBD Note 16 (E0)–127 (G9) Key to which the pattern will be assigned
You can also specify this by pressing a key on the keyboard.
PAD Number PAD 1–PAD 9 Pad number to which the pattern is to be assigned
You can also specify a pad directly by pressing it.
Pattern STOP, OFF,
PTN001–PTN100 STOP: The key/pad will be a Stop Trigger key/pad that stops the currently playing patterns.
OFF: Select this for keys/pads to which you do not want to assign a pattern.
PTN001–PTN100: Pattern number that will be assigned to the key/pad
The name of the selected pattern will be displayed at the right of the pattern number.
Playback Mode LOOP1, LOOP2,
ONCE Specify how the pattern will be played.
LOOP1: The pattern will play back repeatedly as long as the key is held down.
LOOP2: The pattern will play back repeatedly. To stop playback, press a Stop Trigger key or press
the same key once again.
ONCE: The pattern will play back once.
Mute Group OFF, 1–31 This function lets you prevent patterns of the same group from sounding together.
For example, a fill-in and bridge should never be played at the same time, and to ensure that this
does not occur, you can set the fill-in and bridge to the same mute group number.
Thirty-one mute groups can be specified. Select “OFF” if you do not want to use a mute group for
a pattern.
Fantom-Xa_e.book 155 ページ ２００４年１０月２２日 金曜日 午後２時３分