Roland Fantom-Xa - Manual (Page 139)

139
Editing Songs
This function changes the keyboard playing dynamics (velocity) of a
specified note area.
For details on the settings, refer to Basic Operation for Track
Editing (p. 133).
fig.ChangeVelo
This function transfers the MIDI channel of a specified area of
sequencer data into a different MIDI channel.
For details on the settings, refer to Basic Operation for Track
Editing (p. 133).
fig.ChangeCh
Changing the Velocity (Volume)
(Change Velocity)
Parameter Value Explanation
Track/Pattern TRK ALL,
TRK 1–16,
PTN001–100 Phrase track(s) or pattern
whose velocity will be
changed
TRK ALL: Phrase tracks 1–16
TRK 1–16: Specified phrase track
PTN001–100: Specified pattern
Ch/Part ALL, Ch 1–16 MIDI channel(s) of notes
for which velocity will be
changed
ALL: Changes velocity for all notes.
Ch 1–16: Changes the velocity for only the
notes of a specific MIDI channel.
Measure 0001– Range of measures whose
velocity will be changed
If you set “For” to
“ALL,” all measures will
be specified.
For 1–ALL
Bias -99– +99 Adds a fixed bias amount
to all velocities.
Magnify 0–200% Set this parameter if in-
creases or decreases in ve-
locity variations are
desired.
For less velocity varia-
tion, use settings of
“99%” or less. For more
velocity variation, set it
to “101%” or greater.
With a setting of
“100%,” velocity values
do not change.
Range Min 0 (C -)–127 (G9) Range of note numbers for
which velocity will be
changed
You can also specify the
key range by pressing
keys on the keyboard.
Range Max
Changing the MIDI Channel
(Change Channel)
Parameter Value Explanation
Track/Pattern TRK ALL,
TRK 1–16,
PTN001–100 Phrase track(s) or pattern
in which the MIDI channel
will be changed
TRK ALL: Phrase tracks 1–16
TRK 1–16: Specified phrase track
PTN001–100: Specified pattern
Measure 0001– Range of measures in
which the MIDI channel
will be changed
If you set “For” to
“ALL,” all measures will
be specified.
For 1–ALL
Status ALL, Note,
Poly Aftertouch,
Control Change,
Program
Change,
Channel After-
touch,
Pitch Bend Type of data for which you
wish to change the MIDI
channel
When “Status” is “Note” or “Poly Aftertouch”
Range Min 0 (C -)–127 (G9) Range of note numbers for
which the MIDI channel
will be changed
You can also specify the
key range by pressing
keys on the keyboard.
Range Max
When “Status” is “Control Change”
Range Min 0–127 Range of controller num-
bers for which the MIDI
channel will be changed
Range Max
When “Status” is “Program Change”
Range Min 1–128 Range of program num-
bers for which the MIDI
channel will be changed
Range Max
Src Channel ALL, Ch 1–16 Set Src Channel to the
MIDI channel that you
want to change, and set Dst
Channel to the MIDI chan-
nel to which it will be
changed.
If you set “Src Channel”
to “ALL,” the sequencer
data of all MIDI chan-
nels will be combined
into “Dst Channel.”
Dst Channel Ch 1–16
Fantom-Xa_e.book 139 ページ ２００４年１０月２２日 金曜日 午後２時３分