beautypg.com

P. 64, 64 creating a rhythm set – Roland Fantom-Xa User Manual

Page 64

background image

64

Creating a Rhythm Set

[F1 (TVA PRM)]

[F2 (TVA ENV)]

Parameter Group [F5 (TVA)]
Adjusting the Volume (TVA/TVA Envelope)

Parameter

Value

Explanation

Tone Level

0–127

Volume of the tone

This setting is useful primarily for adjusting the volume balance between tones.

Level V-Curve

FIX, 1–7

Curve that determines how keyboard playing dynamics (velocity) will affect the volume

Set this to “FIX” if you don’t want the volume of the tone to be affected by the keyboard velocity.

Level V-Sens

-63– +63

Set this when you want the volume of the tone to change depending on keyboard playing dynamics.

Set this to a positive (+) value to have the changes in tone volume increase the more forcefully the keys
are played; to make the tone play more softly as you play harder, set this to a negative (-) value.

Tone Pan

L64–0–63R

Left/right position of the tone

Random Pan Depth

0–63

Use this parameter when you want the stereo location to change randomly each time you press a key.

Higher settings will produce a greater amount of change.

Alternate Pan
Depth

L63–0–63R

This setting causes panning to be alternated between left and right each time a key is pressed.

Higher settings will produce a greater amount of change. “L” or “R” settings will reverse the order in
which the pan will alternate between left and right. For example if two rhythm tones are set to “L” and
“R” respectively, the panning of the two rhythm tones will alternate each time they are played.

Parameter

Value

Explanation

A-Env T1 V-Sens

-63– +63

This allows keyboard dynamics to affect the T1 of the TVA envelope.

If you want Time 1 to be speeded up for strongly played notes, set this parameter to a positive
(+) value. If you want it to be slowed down, set this to a negative (-) value.

A-Env T4 V-Sens

-63– +63

Use this parameter when you want key release speed to affect the T4 value of the TVA envelope.

If you want T4 to be speeded up for quickly released notes, set this parameter to a positive (+)
value. If you want it to be slowed down, set this to a negative (-) value.

A-Env Time 1–4

0–127

TVA envelope times (T1–T4)

Higher settings will lengthen the time until the next volume level is reached.

A-Env Level 1–3

0–127

TVA envelope levels (L1–L3)

Specify how the volume will change at each point, relative to the Tone Level value.

1

2

3

4

5

6

7

T1 T2

T3

T4

L3

L1

L2

Note off

Level

TVA Envelope

Time

Note on

Fantom-Xa_e.book 64 ページ 2004年10月22日 金曜日 午後2時3分