Roland Fantom-Xa - Manual (Page 15)

15
Getting Ready
Since Fantom-Xa contains no amplifier or speakers, you’ll need to
connect it to audio equipment such as a keyboard amplifier, monitor
speaker system or home stereo, or use headphones to hear its sound.
In order to fully experience the Fantom-Xa’s sound, we recommend
using a stereo amp/speaker system. If you’re using a mono system,
however, make your connections to the Fantom-Xa’s OUTPUT A
(MIX) jack L (MONO).
* Audio cables are not included with the Fantom-Xa. You’ll need to
provide them.
921
To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the power
on all devices before making any connections.
fig.Connect.e
924
To prevent the inadvertent disruption of power to your unit
(should the plug be pulled out accidentally), and to avoid
applying undue stress to the AC adaptor jack, anchor the power
cord using the cord hook, as shown in the illustration.
Connections
Stereo headphones
Monitor speakers
(powered)
Power amp
Mixer etc.
AC adaptor
to the Power Outlet
Fantom-Xa_e.book 15 ページ ２００４年１０月２２日 金曜日 午後２時３分