Nortel Networks Call Center Telephone User Manual
Page 103
Chapter 8 Setting up agents 103
Call Center Telephone Administration Guide
8
Press CHNG if you want to change the agent’s priority
or
press NEXT and go to step 14.
NOTE: This step appears only if you use Basic Call Center.
If you use Enhanced Call Center, go to step 10.
9
Enter a priority from 1 to 20 for the agent and press OK.
1 is the highest priority. 10 is the default.
10 Press NEXT to keep the agent at agent status
or
press CHNG and then NEXT to give the agent supervisor status.
11 Press NEXT if you do not want calls to be force-delivered to the
agent
or
press CHNG and then NEXT if you want calls to be force-delivered to
the agent.
12 Press OK to accept BUSY (Make Agent Busy) as the Missed Call
option
or
press LOGOUT to select Automatic Logout and press OK.
13 Press
OK
if you want prompting for Activity codes to be optional, or
press PRMPT if you want agents to be prompted and press
OK
.
NOTE: This step appears only if you use Enhanced Call Center.
14 Press ® to end the session.
Priority: 10
CHNG NEXT
Priority:
RETRY OK
Supervisor: N
CHNG NEXT
Auto answer: N
CHNG NEXT
Miss call: BUSY
LOGOUT BUSY OK
AC entry: OPT
OPT PRMPT OK
Agent Admin
ADD DEL CHNG