Paradyne 9788 - Manual (Page 41)

9700-A2-GB20-20 December 2002 4-1
4
Configuration Options
This chapter describes all the configuration options available on the FrameSaver
DSL devices. They can be modifed using the user interface or OpenLane SLM:
Using the Easy Install Feature on page 4-3
Entering System Information and Setting the System Clock on page 4-8
Configuration Option Tables on page 4-9
Configuring the Overall System on page 4-10
— Configuring Frame Relay and LMI for the CSU/DSU
— Configuring Class of Service Definitions
— Configuring Service Level Verification Options
— Configuring General System Options
Configuring Network Interfaces on page 4-20
— Configuring the Network Physical Interface
— Configuring Frame Relay for the Network Interface
— Configuring Circuit Records for the Network Interface (9783, 9788)
— Configuring ATM for the Network Interface (9783, 9788)
Configuring the User Data or Virtual Router Port on page 4-28
— Configuring the CSU/DSU’s Data Port Physical Interface
— Configuring Frame Relay on the CSU/DSU’s Data Port
— Configuring DLCI Records
Configuring PVC Connections on page 4-35
Configuring the IP Path List on page 4-37
Setting Up Management and Communication on page 4-38
— Configuring Node IP Information
— Configuring Management PVCs
— Configuring General SNMP Management