Paradyne 9788 - Manual (Page 300)

D. Router Command Line Summaries and Shortcuts
D-2 December 2002 9700-A2-GB20-20
Show Command Summary
Table D-1, Show Commands , lists all of the show, or display, commands for the
CLI.
Table D-1. Show Commands
Command Function
s how a rp Displays all the devices in the router’s ARP
table.
s how b ridge Displays the router’s bridge forwarding
database entries.
s how c onfiguration Displays the router’s current configuration.
s how c onfiguration { s aved | u nsaved} Shows the current configuration, either saved in
memory or entered during the current session.
s how f rame-relay m ap Shows the status of all frame relay DLCIs on
the router’s frame relay interface.
s how in terface
[ intf-type intf-num [.sub-intf-num] ]
Shows the status of the specified interface,
sub-interface, or all interfaces and
sub-interfaces for the router.
s how ip d hcp b inding [ ip-address] Shows the address bindings associated with
the DHCP server.
If an IP address is specified, only bindings
for that client will be displayed.
If no IP address is specified, all DHCP
server bindings are displayed.
s how ip n at t ranslations Displays all the address bindings associated
with the DHCP server.
s how ip r oute [ ip-address] Shows the Routing Table entry for the device
with the specified IP address, or all Routing
Table entries if no IP address is specified.
s how ip t raffic Shows IP statistics for the router.
s how s panning-tree Displays the router’s spanning-tree topology.