Paradyne 9788 - Manual (Page 257)

B. SNMP MIBs, Traps, and RMON Alarm Defaults
9700-A2-GB20-20 December 2002 B-17
DLCI Alarm Defaults
These alarms apply to all DLCIs on the network interface and can be created
during RMON initialization or when a DLCI is created. They are placed in the
Paradyne alarm area and are listed alphabetically in
Table B-11, DLCI Alarm
Defaults .
Table B-11. DLCI Alarm Defaults (1 of 2)
Item
Sample
Type
1
MIB/Tag/OID
2
Interval
Event
Type
Threshold Default
Rising Falling
Average
Latency A MIB: pdn_FrExt.mib (Enterprise)
Tag: devFrExtLatencyAvg
OID:
.1.3.6.1.4.1.1795.2.24.2.6.9.4.3.1.5.I.D
900 secs
(15 mins) None Must be
configured 0
Congested
Seconds D MIB: pdn_FrExt.mib (Enterprise)
Tag: devFrExtDlciStsCongestedSecs
OID:
.1.3.6.1.4.1.1795.2.24.2.6.9.4.2.1.6.I.D
60 secs
(1 min) Rising 5 5
Current
Latency A MIB: pdn_FrExt.mib (Enterprise)
Tag: devFrExtLatencyLatest
OID:
.1.3.6.1.4.1.1795.2.24.2.6.9.4.3.1.7.I.D
60 secs
(1 min) None Must be
configured 0
DLCI Inactive
Seconds D MIB: pdn_FrExt.mib (Enterprise)
Tag: devFrExtDlciStsInactiveSecs
OID:
.1.3.6.1.4.1.1795.2.24.2.6.9.4.2.1.2.I.D
900 secs
(15 mins) Rising 1 1
Frames
Dropped by
Network D MIB: pdn_FrExt.mib (Enterprise)
Tag: devFrExtDlciNetDropFr
OID:
.1.3.6.1.4.1.1795.2.24.2.6.9.4.1.1.20.I.D
60 secs
(1 min) Rising 1 1
Frames
Received D MIB: Frame Relay DTE MIB (RFC 2115)
Tag: frCircuitReceivedFrames
OID: .1.3.6.1.2.1.10.32.2.1.8.I.D
60 secs
(1 min) None Must be
configured 0
Frames Sent D MIB: Frame Relay DTE MIB (RFC 2115)
Tag: frCircuitSentFrames
OID: .1.3.6.1.2.1.10.32.2.1.6.I.D
60 secs
(1 min) None Must be
configured 0
1 D = Delta: The calculated difference between the current value and the previous value is contained in the MIB.
A = Absolute value for the item is contained in the MIB.
2
I in the OID = Interface ID for the frame relay link.
D = DLCI number.