Telnet – Paradyne 9788 User Manual
Page 191
8. Troubleshooting
9700-A2-GB20-20
December 2002
8-7
Telnet
The Telnet feature allows you to initiate a Telnet session with a Telnet server on an
IP aware device. Telnet is available with firmware release 2.1 and above:
Control
→Telnet
Telnet Example
Procedure
To initiate a Telnet session from the FrameSaver device:
1. Enter an IP address and select Use_Internal_Route, or select a destination
interface (Net1-FR1 or Port-1).
Clicking on Clear resets the IP address to 000.000.000.000.
2. Enter a DLCI, or, for ATM links, a VPI and VCI.
3. Click on Start. The prompt changes to Stop and the Telnet session is initiated.
4. The outbound data path is monitored for Ctrl-} (the Ctrl key pressed
simultaneously with the } key). When you press Ctrl-}, the Telnet session is
ended.
main/control/telnet 9720
Device Name: Node A 09/11/2002 13:37
TELNET
Target IP Address: 000.000.000.000 Clear
Destination Interface: Net1-FR1 DLCI: 1002
---------------------------------------------------
Start Escape Character is Ctrl-}
Status: Idle
--------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu MainMenu Exit
Refresh
PgUp PgDn