Paradyne 9788 - Manual (Page 158)

7. Operation and Maintenance
7-22 December 2002 9700-A2-GB20-20
Test Status Messages
Test status messages, listed in Table 7-7, Test Status Messages , appear in the
right column of the System and Test Status screen. You have the option to
continue the test or to abort the test. See
Chapter 8, Troubleshooting , for more
information on tests, including how to start and stop them.
IP Path Connection Status
IP Path Connection Status is selected from the Status menu.
Main Menu
→Status→IP Path Connection Status
The IP Path Connection Status screen displays the IP Path List, a list of devices
that can be reached by their IP addresses for Service Level Management
purposes.
The list is displayed in IP address order and includes both static addresses
entered using the IP Path List (Static) configuration screen (see
Configuring the IP
Path List in Chapter 4, Configuration Options) and paths discovered as packets
are received from other FrameSaver units
This screen only appears when Service Type is set to Frame Relay.
Table 7-7. Test Status Messages
Message What It Indicates
511 Pattern Test Active,
Network 1
(9788 only)
A 511 pattern test is active on the SHDSL network
interface.
DTE External LB Active, Port-1
(CSU/DSU only)
External DTE Loopback is running on the user data
port.
DTE Init. Ext LB Active, Port-1
(CSU/DSU only)
The DTE has initiated an external DTE Loopback on the
user data port. This message remains as long as the
LL lead is asserted.
Lamp Test Active The Lamp Test is active, causing the LEDs on the
faceplate to flash on and off.
Monitor Pttn Active, DLCI nnnn,
frame_relay_link
The unit is monitoring a test pattern on the specified
frame relay link DLC1.
No Test Active No tests are currently running.
PVC Loopback Active,
DLCI
nnnn, frame_relay_link
A PVC Loopback is active on the specified frame relay
link DLCI.
Send Pttn Active, DLCI nnnn,
frame_relay_link
The unit is sending the selected test pattern on the
specified DLCI for the interface.
Tran. Pass-Thru Test Active,
Network 1
(9788 only)
A Transparent Pass-Through Loopback Test is active on
the specified SHDSL Network Interface.