Paradyne 9788 - Manual (Page 131)

6. Security and Logins
9700-A2-GB20-20 December 2002 6-9
Assigning SNMP Community Names and Access Levels
The FrameSaver unit supports the SNMP protocol and can be managed by an
SNMP manager. SNMP manager access can be limited by:
Assigning the SNMP community names that are allowed to access the
FrameSaver unit’s MIB.
Specifying the type of access allowed for each SNMP community name.
Whenever an SNMP manager attempts to access a MIB object, the community
name must be supplied.
Procedure
To assign SNMP community names and access types:
1. Select the General SNMP Management options.
Main Menu →Configuration→Management and Communication→
General SNMP Management
2. Set the following configuration options, as appropriate:
3. Save your changes.
See Configuring General SNMP Management in Chapter 4, Configuration
Options, for more information about General SNMP Management configuration
options.
To . . . Set the configuration option . . .
Assign SNMP Community Name 1
and/or 2 Community Name text: Up to 255 characters.
Assign the type of access allowed
for each SNMP community name Name 1 Access and Name 2 Access to:
Read or Read/Write.