Paradyne 9788 - Manual (Page 105)

9700-A2-GB20-20 December 2002 5-1
5
Configuring the FrameSaver DSL
Router
This chapter includes the following:
FrameSaver DSL Router Overview on page 5-2
IP Routing on page 5-3
Address Resolution Protocol on page 5-3
Proxy ARP on page 5-3
Interface Configuration on page 5-4
— IP Options Processing
— Applications Supported by NAT
— NAT Configuration Example
Network Address Port Translation on page 5-8
— NAPT Configuration Example
— NAT and NAPT Configuration Example
Dynamic Host Configuration Protocol Server on page 5-11
— DHCP Server with NAT Configuration Example
— DHCP Server at Remote Site Configuration Example
DHCP Relay Agent on page 5-13
— DHCP Relay Configuration Example
Router Security on page 5-15
— IP Router Filtering
— Bridge Filtering
— IP Filtering
— Land Bug Prevention
— Smurf Attack Prevention
Verifying the End-to-End Management Path on page 5-17
Provisioning the Router Interface on page 5-17
Configuring the Router Using Terminal Emulation on page 5-18
— Uploading and Downloading the Router Configuration Via the CLI